Wood is the most versatile of the fence materials. Except for running it up a cliff, there are very few things that wood cannot fence in or out. Options include Cypress or Pressure Treated Pine in a variety of styles, heights, and gate patterns. Wood fence provides warmth, acoustic properties, and aesthetics not available in any other fencing material.
“Build on Site” is the way to go! This Pressure Treated Board on Board Privacy Fence in Port Richey replaced an overgrown 30 year old hedge. It provides privacy from the neighbors and protection from their loud, aggressive dog.
The customer was delighted with the result and said, “best workmanship I have seen in years.”
Our Wood Fence Projects
Why settle for this basic Dogear Pressure Treated Fence Panel? When you could (for a few dollars more) have this Custom Built Pressure Treated Fence that will set your home apart from all the rest? This fence lets everyone know you appreciate the finer things and gives your place a finished look and polish that […]
Superior construction makes a Hunter’s Woods Fencing Wood Fence better than the rest. The shortest nail we use is a full 2 3/8″ long. Most wood fences are constructed with shorter 2″ nails, or worse yet, staples. We use Galvanized Ring Shank nails for greater penetration and strength and the ring shanks hold much more […]
Attention all Property Owners: Hunter’s Woods Fencing does fence repairs and reconditions. Not into spending a lot, but getting more life out of your existing fence? We can help!
This built on site (Stickbuilt) Pressure Treated board on board wood fence follows the contour of the land to eliminate gaps at the bottom and improve curb appeal by blending in to the natural surroundings. Square corners, vertical and level lines are very rare in nature so in country neighborhoods or areas that are built […]
This short video from a Tampa install shows Hunter’s Woods Fencing’s Premium Pressure Treated Board on Board Dogear Wood Fence. What makes it premium? The pickets are 5/8″ thick and 5 1/2″ wide. They are mounted on 2×4 rails with 2 3/8″ Galvanized Ring Shank nails. Most of the fences you see, even the board on […]
If wood is your choice of fence material and your property isn’t level, you may have to choose the installation method. Will you step install, or follow the contour of the ground? Most customers prefer to follow the slope, but several different challenges come into play. When following contour, the fence must be Stickbuilt, meaning […]
This Guide is full of information you need to know BEFORE you buy. It is not full of sales hype or pitches, it is full of great how to info including selecting a company, evaluating quality, avoiding dishonest sales tactics and a full section of resources for DIY. There are installation instructions for Chain Link […]
Hunter’s Woods Fencing’s Custom Built Wood Fences are top of the line. Here’s what goes into a Premium Board on Board Pressure Treated Wood Privacy Fence. We start with 4×4 posts specially pressure treated for constant ground contact set in cement. Then we use 3 inch Exterior Galvanized Ring Shank nails to attach 3 pressure […]
To provide privacy for their swimming pool, and eliminate the view of the abandoned golf course and shabby old clubhouse in Gulf Harbors, New Port Richey we installed a Custom Stick-built wood fence. This premium fence was built on 4x4s set in cement, with 2×4 rails and 5/8″x5 1/2″ pickets with Exterior Galvanized Ring Shank […]
If PVC fence is too costly, or just does not match your landscaping consider a premium wood fence. You can choose from Cedar, Cypress, or Pressure Treated Pine. We built this New Port Richey fence to follow the contour of the land, and our customer was thrilled with the result. We recommend Built on site […]